Polymer Modified Bitumen Waterproof Coating
Polymer Modified Bitumen Waterproof Coating is a highly elastic waterproof coating made from emulsified asphalt as the base material, modified and toughened with aqueous high-molecular polymer, and enhanced with mineral materials. It is produced through a scientific formula. The coating is highly elastic, adhesive, and UV-resistant. It is simpler and more convenient than traditional torch on membrane, it’s also called liquid waterproofing membrane. Additionally, it is not restricted by the complex shapes of the base layer and can form a continuous, seamless, high-elastic waterproof membrane.
Single-component / Eco friendly / OEM Accepted
APPLICATION RANGE
1.Building Surfaces: Roofs and terraces, Interior and exterior walls, Balconies.
2.Indoor Spaces: Bathrooms, Warehouses, Kitchens.
3.Special Structures: Basements, Pools, Water tanks.
4.Infrastructure: Tunnels, Bridges, Reservoirs.
5.This product is highly suitable for application on top of asphalt membranes.
PACKAGING & COVERAGE
| Specification: | 18kg/pail or 50kg/pail |
| Appearance: | Single component, brown viscous emulsion. Once it dries, it will turn pure black. |
| Coverage: | It is recommended to apply two coats, with each pail covering 13~15m2. |
| Warranty period: | Normal Quality: 6~8 years. Excellent Quality: more than 10 years. |
| Shelf Life: | 1 Year |
TECHNICAL DATA
| Item | Data |
| Solid Content, % | 51 |
| Heat Resistance | No flow, sliding, or dripping at 110°C |
| Elongation at Break, % | 1071 |
| Low-Temperature Flexibility (Standard Conditions) | No cracks at -35°C |
| Water Resistance | 0.10 MPa, 30 minutes: No water leakage |
| Surface Dry Time, h | 8 |
| Drying Time, h | 23 |
| Bonding Strength, MPa | 0.35 |
CUSTOMIZATION SERVICE
Customization is available for product color, packaging design, and package sizes.
Note:
1.This product can be exposed to the sunshine and is UV resistant.
2.This product can be used in areas with heavy water accumulation. It can be submerged in water for 20 days without peeling or falling off, but it cannot be submerged in water for a year.
3.When used in swimming pools or water tanks, a layer of concrete topping or tile topping is required.
4.This product can adhere to surfaces such as concrete, metal, tiles, glass, wood, and other coatings.
5.Application methods: Applying with a sprayer, roller, brush, or scraper.
6.This product can also be diluted with water for use.
7.This product can be used with fiber mesh.
7.This product can be used with fiber mesh.
